First, i need to chose polygons>sphere. Then i shall draw a head of the robot.
Then,i need two small little sphere to made up his eyes.. So i drew two small sphere and attached to the sphere(head).
After that, i drew a cylinder. Two small cylinder, this is to made the side of ear of the robot.I must turn the cylinder vertically and move it both to the side of the sphere.
Next.Two cone is needed to form the ear of the robot.The cone should be rotated 90 degrees.
Then, torus is needed. I drew the torus and reduce the size of the radius. After that i rotate it and fot it in to the cone.
A small cylinder to form the neck. A cube to form the body of the robot.(:
Then,a helix is use to form part of the body of the robot.The helix should be shrink down to fit the size fo the robot.Follow by a small cube under the helix.
Furthermore,The small sphere and the long cylinder is use to form the hand and the shoulder of the robot.
Another cylinder for the arm.
Then follow by the hand and fingers.I drew a small cube for the hand and attached to the other part of the polygons.Fingers are made of small,tiny cylinder.Hands are form!
Follow by the hips and legs. I drew two small cylinder,pyramid to attached the body and legs together.
After that, cylinder and sphere are use to form the thighs and legs.follow by two very small cylinder each for one leg. This is to act as a support for the body weight.
Pei Zhen, where are your process screen shots and descriptions?
ReplyDelete